Kms
Engine CC
image

GHEDINI, Pile Driver

The new hydraulic vibrators IP series are planned for the pile driving. The hydraulic supply of the vibrators IP series takes place through the excavator PT0. The hydraulic vibrators IP series, equipped with their specific device (QP) have been planned for the pile driving without the need to remove the ground in excess. By employing the devices QP at the base of the vibrating plate and laying the compactor IP series at the top of the pile, the combined action between the pressure exerted by the excavator arm on the ground and the high frequency vibrations produced by the vibrating unit allows it to get the vibro pile driving. The motor is bidirectional and in aluminium. Drainage not needed: it works with only the in and out oil hoses Antishock and anticavitation valves, set to 160 bar , in order to protect the motor from possible damages due to a sudden change in pressure Exclusively built with SKF bearings, rings nuts and lock washers.

2020 Hours ltrs 0 Owners
image

Digga's, Trencher

Ideal for mini machines up to 1.5 tonne, the Mini Bigfoot Trencher can be used for pipe laying for irrigation, underground power & communications, road repairs, general construction. Adjustable depth skid foot Precision depth control ensures the spoil auger has optimum ground clearance. Take advantage of every bit of valuable horsepower when trenching. Preset depths: 450 / 600 / 750 / 900mm. Heavy duty crumbing system Start trenching with the crumber in-ground. A super heavy duty spring ensures the crumber stays engaged with the bottom of the trench for maximum spoil removal from start to finish. Skid foot can be seen from machine The new design foot can be clearly seen from the machine / in-cab and allows the operator to see when the trencher is in the correct trenching position. There is no need for a spotter. A cleaner work-side of the trench Digga's new foot design also feeds overburden back onto the chain, transferring it to the spoil auger for a cleaner clearer work side of the trench. Anti-back flex chain design You can be guaranteed of quality and superior performance with our Anti-back Flex design. It prevents the chain links from flexing back in tough soil conditions. Trench in all ground conditions Available in a number of different tooth configurations for trenching in soft ground, mixed grounds and even permafrost so you can get the job done no matter what environment you are in.

2020 Hours ltrs 0 Owners
image

Digga's, Trencher

Brand: Diggaeurope Product Code: GPDiggaMBT Availability: In Stock TRENCHERS - MACHINES UP TO 1.5T Ideal for mini machines up to 1.5 tonne, the Mini Bigfoot Trencher can be used for pipe laying for irrigation, underground power & communications, road repairs, general construction. We provide solutions for compact utility loaders and mini machines of various makes and models including Toro, Kanga, MultiOne, Paddock and more. Adjustable depth skid foot Precision depth control ensures the spoil auger has optimum ground clearance. Take advantage of every bit of valuable horsepower when trenching. Preset depths: 450 / 600 / 750 / 900mm. Heavy duty crumbing system Start trenching with the crumber in-ground. A super heavy duty spring ensures the crumber stays engaged with the bottom of the trench for maximum spoil removal from start to finish. Skid foot can be seen from machine The new design foot can be clearly seen from the machine / in-cab and allows the operator to see when the trencher is in the correct trenching position. There is no need for a spotter. A cleaner work-side of the trench Digga's new foot design also feeds overburden back onto the chain, transferring it to the spoil auger for a cleaner clearer work side of the trench. Anti-back flex chain design You can be guaranteed of quality and superior performance with our Anti-back Flex design. It prevents the chain links from flexing back in tough soil conditions. Trench in all ground conditions Available in a number of different tooth configurations for trenching in soft ground, mixed grounds and even permafrost so you can get the job done no matter what environment you are in. See chanin options. CHAINS FOR ALL GROUND CONDITIONS EARTH - Best used in soft ground like earth and clay COMBINATION - Best used in dry, hard or medium ground conditions TUNGSTEN - Best used in hard or frozen ground conditions and asphalt

2020 Hours ltrs 0 Owners
image

Digga's, Trencher

Brand: Digga Product Code: GPDiggaHT Availability: In Stock TRENCHERS - MACHINES UP TO 8T Get ready for some serious trenching with Digga's Hydrive range of Trenchers. Choose from standard models up to 1200mm digging depth - Ideal for skid steer loaders and tracked loaders up to 3.5 tonne, or choose from the bigger XD models with a wider cutting width perfect for machines up to 8 tonne. Trencher usage ranges from pipe laying for irrigation, to underground power & communications, road repairs, and general construction. Unique drive system positioning Drive System positioning allows for more usable horse power, providing greater efficiency for serious trenching. The EATON motor is housed above the spoil, protecting from rocks and debris. Heavy duty crumbing system Start trenching with the crumber in-ground. A super heavy duty spring ensures the crumber stays engaged with the bottom of the trench for maximum spoil removal from start to finish. Remove spoil from both sides Twin Spoil Augers remove finely crumbled spoil to both sides of the trench for a cleaner finish. Both augers can be detached when needed for close-up trenching to walls or fences. Trench faster & safer with a high visibility grille A High Visibility Grille lets the operator see what they are doing regardless of the trencher's angle, helping them to work faster and safer. Advanced design for minimal ground disturbance Advanced design creates finely crumbed spoil for effective re-compaction and minimal ground disturbance. Anti-back flex chain design You can be guaranteed of quality and superior performance with our Anti-back Flex design. It prevents the chain links from flexing back in tough soil conditions. Trench in all ground conditions Available in a number of different tooth configurations for trenching in soft ground, mixed grounds and even permafrost so you can get the job done no matter what environment you are in. See chanin options. CHAINS FOR ALL GROUND CONDITIONS EARTH - Best used in soft ground like earth and clay COMBINATION - Best used in dry, hard or medium ground conditions TUNGSTEN - Best used in hard or frozen ground conditions and asphalt

2020 Hours ltrs 0 Owners
image

Digga's, Trencher

Brand: Diggaeurope Product Code: GPDiggaBXDT Availability: In Stock TRENCHERS - MACHINES UP TO 8T Ideal for excavators up to 8 tonne, skid steer loaders, and backhoes, the Bigfoot XD Trencher can be used for pipe laying for irrigation, underground power & communications, road repairs, general construction. We provide solutions for machines of various makes and models including Kubota, Bobcat, Cat, JCB, Toyota, New Holland, Case, Komatsu, Kobelco, Takeuchi, Terex, ASV and more. Adjustable depth skid foot Precision depth control ensures the spoil auger has optimum ground clearance. Preset depths range between 450-1200mm for standard flow machines, and 600-1500mm for high flow machines. Heavy duty crumbing system Start trenching with the crumber in-ground. A super heavy duty spring ensures the crumber stays engaged with the bottom of the trench for maximum spoil removal from start to finish. Skid foot can be seen from the cab The new design foot can be clearly seen from the cab and allows the operator to see when the trencher is in the correct trenching position. No need for a spotter. A cleaner work-side of the trench Digga's new foot design also feeds overburden back onto the chain, transferring it to the spoil auger for a cleaner clearer work side of the trench. Anti-back flex chain design You can be guaranteed of quality and superior performance with our Anti-back Flex design. It prevents the chain links from flexing back in tough soil conditions. Trench in all ground conditions Available in a number of different tooth configurations for trenching in soft ground, mixed grounds and even permafrost so you can get the job done no matter what environment you are in. See chanin options. CHAINS FOR ALL GROUND CONDITIONS EARTH - Best used in soft ground like earth and clay COMBINATION - Best used in dry, hard or medium ground conditions TUNGSTEN - Best used in hard or frozen ground conditions and asphalt

2020 Hours ltrs 0 Owners
image

Digga's, Trencher

Brand: Diggaeurope Product Code: GPDiggaBT Availability: In Stock TRENCHERS - MACHINES UP TO 4.5T Ideal for excavators up to 4.5 tonne, skid steer loaders, and mini machines, the Bigfoot Trencher can be used for pipe laying for irrigation, underground power & communications, road repairs, general construction. We provide solutions for machines of various makes and models including Kubota, Bobcat, Cat, JCB, Toyota, New Holland, Case, Komatsu, Kobelco, Takeuchi, Terex, ASV and more. Adjustable depth skid foot Heavy duty crumbing system Start trenching with the crumber in-ground. A super heavy duty spring ensures the crumber stays engaged with the bottom of the tr Skid foot can be seen from the cab The new design foot can be clearly seen from the cab and allows the operator to see when the trencher is in the correct trenching position. No need for a spotter. A cleaner work-side of the trench Digga's new foot design also feeds overburden back onto the chain, transferring it to the spoil auger for a cleaner clearer work side of the trench. Anti-back flex chain design You can be guaranteed of quality and superior performance with our Anti-back Flex design. It prevents the chain links from flexing back in tough soil conditions Trench in all ground conditions Available in a number of different tooth configurations for trenching in soft ground, mixed grounds and even permafrost so you can get the job done no matter what environment you are in. See chanin options. CHAINS FOR ALL GROUND CONDITIONS EARTH - Best used in soft ground like earth and clay COMBINATION - Best used in dry, hard or medium ground conditions TUNGSTEN - Best used in hard or frozen ground conditions and asphalt

2020 Hours ltrs 0 Owners
image

Digga's, Trencher

Brand: Diggaeurope Product Code: Bigfoot XD Trencher 4.8T-8T Availability: In Stock Ideal for excavators up to 8 tonne, skid steer loaders, and backhoes, the Bigfoot XD Trencher can be used for pipe laying for irrigation, underground power & communications, road repairs, general construction. Adjustable depth skid foot Precision depth control ensures the spoil auger has optimum ground clearance. Preset depths range between 450-1200mm for standard flow machines, and 600-1500mm for high flow machines. Heavy duty crumbing system Start trenching with the crumber in-ground. A super heavy duty spring ensures the crumber stays engaged with the bottom of the trench for maximum spoil removal from start to finish. Skid foot can be seen from the cab The new design foot can be clearly seen from the cab and allows the operator to see when the trencher is in the correct trenching position. No need for a spotter. A cleaner work-side of the trench Digga's new foot design also feeds overburden back onto the chain, transferring it to the spoil auger for a cleaner clearer work side of the trench. Anti-back flex chain design You can be guaranteed of quality and superior performance with our Anti-back Flex design. It prevents the chain links from flexing back in tough soil conditions. Trench in all ground conditions Available in a number of different tooth configurations for trenching in soft ground, mixed grounds and even permafrost so you can get the job done no matter what environment you are in.

2020 Kms ltrs 0 Owners
image

GHEDINI, Bush Cutters

Brand: Ghedini Product Code: Hydraulic Bush Cutter (Mulcher) DB 36-38 Availability: In Stock The hydraulic supply takes place through the excavator PTO. The bidirectional rotor and the lack of a roller allows the bush cutter to work in both directions.

2020 Kms ltrs 0 Owners
image

GHEDINI, Bush Cutters

Brand: Ghedini Product Code: Hydraulic Bush Cutter (Mulcher) DA 51-52 Availability: In Stock The hydraulic supply takes place through the excavator PTO. The bidirectional rotor and the lack of a roller allows the bush cutter to work in both directions. The built-in-unit carpentry, like a normal bucket, allows it more resistance to possible accidental hits. Antishock and anticavitation valves, set to 160 bar, in order to protect the motor from possible damages due to a sudden change in pressure. Bidirectional and aluminium motor. Drainage not needed : it works with only the in and out oil hoses. The rotor works at 3000 rpm for a better efficacy in the bush cutting. The knives are Y shaped, with one more knife in the middle, allowing it to cut branches up to 6/8 cm diameter. Possibility both of direct coupling, with dimensions given by customers, and quick hitch.

2020 Kms ltrs 0 Owners
image

GHEDINI, Bush Cutters

Brand: Ghedini Product Code: GPGhidiniBC5 Availability: In Stock The hydraulic bush cutters DK series are designed to be applied to operating excavators weighing between 7 and 25 tons. The built-in-unit carpentry of our DK Series bushcutter, like a normal bucket, grants more resistance to possible accidental hits. The bracket has pins bolted on, with possibility to regulate its position.. Anti-shock and anti-cavitation valves are set to 160 bar, in order to protect the motor from possible damages due to a sudden change of pressure. The motor is made in aluminium. Drainage is not needed : it works with only the in-and-out oil hoses.The rotor works at 3000 rpm for a better bush cutting. The knives are Y shaped, with one more knife in the middle, allowing it to cut branches up to 14 cm diameter. Exclusively built with SKF bearings, rings nuts and lock washers.

2020 Kms ltrs 0 Owners
image

GHEDINI, Bush Cutters

Ghedini Bush Cutters - DC Series Brand: Ghedini Product Code: GPGhediniBC14 Availability: In Stock

2020 Kms ltrs 0 Owners
image

GHEDINI, Bush Cutters

Brand: Ghedini Product Code: GPGhediniBC3 Availability: In Stock The hydraulic supply takes place through the excavator PTO. The bidirectional rotor and the lack of a roller allows the bush cutter to work in both directions. The built-in-unit carpentry of our DB Series bushcutter, like a normal bucket, grants more resistance to possible accidental hits. Anti-shock and anti-cavitation valves are set to 160 bar, in order to protect the motor from possible damages due to a sudden change of pressure. The motor is bidirectional and made in aluminium. Drainage is not needed : it works with only the in-and-out oil hoses. The rotor works at 3000 rpm for a better bush cutting. The knives are Y shaped, with one more knife in the middle, allowing it to cut branches up to 12 cm diameter. Exclusively built with SKF bearings, rings nuts and lock washers. It’s possible to get the product with options of direct coupling, dimensions given by customers, quick hitch and even a hammer rotor suited for working widths of 1300 mm.

2020 Kms ltrs 0 Owners
image

GHEDINI, Bush Cutters

Brand: Ghedini Product Code: GPGhediniBC3 Availability: In Stock The hydraulic supply takes place through the excavator PTO. The bidirectional rotor and the lack of a roller allows the bush cutter to work in both directions. The built-in-unit carpentry of our DB Series bushcutter, like a normal bucket, grants more resistance to possible accidental hits. Anti-shock and anti-cavitation valves are set to 160 bar, in order to protect the motor from possible damages due to a sudden change of pressure. The motor is bidirectional and made in aluminium. Drainage is not needed : it works with only the in-and-out oil hoses. The rotor works at 3000 rpm for a better bush cutting. The knives are Y shaped, with one more knife in the middle, allowing it to cut branches up to 12 cm diameter. Exclusively built with SKF bearings, rings nuts and lock washers. It’s possible to get the product with options of direct coupling, dimensions given by customers, quick hitch and even a hammer rotor suited for working widths of 1300 mm.

2020 Kms ltrs 0 Owners
image

GHEDINI, Bush Cutters

Our hydraulic Bush Cutters DA Series Standard are designed for mini-midi excavators of operating weight up to 5.5 tons. The built-in-unit carpentry of our DA Series (standard) bushcutter, like a normal bucket, grants more resistance to possible accidental hits. Anti-shock and anti-cavitation valves are set to 160 bar, in order to protect the motor from possible damages due to a sudden change of pressure. The motor is bidirectional and made in aluminium. Drainage is not needed : it works with only the in-and-out oil hoses. The rotor works at 3000 rpm for a better bush cutting. The knives are Y shaped, with one more knife in the middle, allowing it to cut branches up to 6/8 cm diameter. It’s possible to get the product with options of direct coupling, dimensions given by customers, quick hitch and even a hammer rotor suited for working widths of 840 or 1080 mm.

2020 Kms ltrs 0 Owners
image

GHEDINI, Bush Cutters

Brand: Ghedini Product Code: GPGhediniBC2 Availability: In Stock The hydraulic supply takes place through the excavator PTO. Workings widths available: 650 mm, 840 mm and 1080 mm. The built-in-unit carpentry of our DA Series (heavy) bushcutter, like a normal bucket, grants more resistance to possible accidental hits. Anti-shock and anti-cavitation valves are set to 160 bar, in order to protect the motor from possible damages due to a sudden change of pressure. The motor is bidirectional and made in aluminium. Drainage is not needed : it works with only the in-and-out oil hoses. The rotor works at 3000 rpm for a better bush cutting. The knives are Y shaped, with one more knife in the middle, allowing it to cut branches up to 6/8 cm diameter.Exclusively built with SKF bearings, rings nuts and lock washers. It’s possible to get the product with options of direct coupling, dimensions given by customers, quick hitch and even a hammer rotor suited for working widths of 840 or 1080 mm.

2020 Kms ltrs 0 Owners
image

Digga's, Earth Drills

Brand: Digga Product Code: GPDiggaME2T-5T Availability: In Stock Digga's PDX2 to PD6 range of Earth Drills, also called Auger Drives, are ideally suited for mini excavators with a flow between 30 and 115 lpm and weight from 2T to 5T. Completely manufactured and assembled by Digga, using only the highest-grade materials and strictest quality control. Digga's England facility supplies European countries such as Russia, Poland, Germany, Italy, France, Spain, United Kingdom, Norway, Sweden and Finland to name a few. The innovative design allows the gearbox to go down the hole to maximise drilling depth without extensions, eliminating downtime and minimises maintenance, optimising your returns. Digga planetary earth drills are fitted with Digga / Eaton bell motors specially designed for earth drilling in most ground conditions. Backed up with industry leading warranty and a European factory, we provide solutions for mini excavators of various makes and models including Kubota, Bobcat, Cat, JCB, Case, Komatsu, Kobelco, Takeuchi and more. Features Compact high torque Digga manufactured gearbox Highly efficient design with less moving parts Fitted with Eaton/Digga geroler hydraulic motor No case drain required Full range of shafts available upon request Extreme duty shaft locking system Drive fits down the hole for greater digging depth Low maintenance with 5yr gear box and 3yr motor warranty

2020 Kms ltrs 0 Owners
image

Digga's, Earth Drills

Digga's PDD to PDX3 range of Earth Drills, also called Auger Drives, are ideally suited for micro excavators and small skid steer loaders with a flow between 15 to 55 lpm and a weight of 750kg to 2T. Ideally used for drilling holes with augers for fencing, tree planting, house foundations, and more. Digga's England facility supplies European countries such as Russia, Poland, Germany, Italy, France, Spain, United Kingdom, Norway, Sweden and Finland to name a few. The innovative design allows the gearbox to go down the hole to maximise drilling depth without extensions, eliminating downtime and minimises maintenance, optimising your returns. Digga planetary earth drills are fitted with Digga / Eaton bell motors specially designed for earth drilling in most ground conditions. Backed up with industry leading warranty and a European factory, we provide solutions for micro excavators and small skid steer loaders of various makes and models including Kubota, Bobcat, Cat, JCB, Toyota, New Holland, Case, Komatsu, Kobelco, Takeuchi, Terex, ASV and more. Features Compact high torque Digga manufactured gearbox Highly efficient design with less moving parts Fitted with Eaton/Digga geroler hydraulic motor No case drain required Full range of shafts available upon request Extreme duty shaft locking system Drive fits down the hole for greater digging depth Low maintenance with 5yr gear box and 3yr motor warranty

2020 Kms ltrs 0 Owners
image

Digga's, Backhoe

Brand: Digga Product Code: GPDiggaE20T-50T Availability: In Stock Digga's PD25 to PD50 range of Earth Drills, also called Auger Drives, are ideally suited for excavators with a flow between 120 to 230 lpm and a weight between 20 and 50T. Digga's drilling drives are world reknowned and available via our dealer network throughout Europe. Fitted with Digga / Eaton bell motors with intergrated pressure relief valve and input housing. The innovative design allows the gearbox to go down the hole to maximise drilling depth without extentions, eliminating downtime and minimising maintenance, optimising your returns. Digga planetary earth drills are specially designed for earth drilling and augering in most ground conditions. Backed up with industry leading warranty and a European factory, we provide solutions for excavators and backhoes of various makes and models including Kubota, Bobcat, Cat, JCB, Case, Komatsu, Kobelco, Takeuchi and more. Features Compact high torque Digga manufactured gearbox Highly efficient design with less moving parts Fitted with Eaton/Digga geroler hydraulic motor No case drain required Full range of shafts available upon request Extreme duty shaft locking system Drive fits down the hole for greater digging depth Low maintenance with 5yr gear box and 3yr motor warranty

2020 Kms ltrs 0 Owners
image

Digga's, Backhoe

Brand: Digga Product Code: GPDiggaE10T-20T Availability: In Stock Digga's PD12 to PD25 range of Earth Drills, also called Auger Drives, are ideally suited for 10 to 20t excavators with a flow between 70 to 230 lpm. Our Earth Drills are distributed all around Europe including Russia, Poland, Germany, Italy, France, Spain, United Kingdom, Norway, Sweden and Finland to name a few. The innovative design allows the gearbox to go down the hole to maximise drilling depth without extentions, eliminating downtime and minimises maintenance, optimising your returns. Digga planetary earth drills are fitted with Digga / Eaton bell motors specially designed for earth drilling in most ground conditions. Backed up with industry leading warranty and a European factory, we provide solutions for excavators and backhoes of various makes and models including Kubota, Bobcat, Cat, JCB, Case, Komatsu, Kobelco, Takeuchi and more. Features Compact high torque Digga manufactured gearbox Highly efficient design with less moving parts Fitted with Eaton/Digga geroler hydraulic motor No case drain required Full range of shafts available upon request Extreme duty shaft locking system Drive fits down the hole for greater digging depth Low maintenance with 5yr gear box and 3yr motor warranty

2020 Kms ltrs 0 Owners
image

Digga's, Backhoe

Digga's PD4 to PD10 range of Earth Drills, also called Auger Drives, are ideally suited for Backhoes and Excavators with a flow between 55 to 115 lpm and a weight from 5T to 10T. Ideally used for drilling holes with augers for fencing, tree planting, house foundations, and more. Digga's England facility supplies European countries such as Russia, Poland, Germany, Italy, France, Spain, United Kingdom, Norway, Sweden and Finland to name a few. The innovative design allows the gearbox to go down the hole to maximise drilling depth without extensions, eliminating downtime and minimises maintenance, optimising your returns. Digga planetary earth drills are fitted with Digga / Eaton bell motors specially designed for earth drilling in most ground conditions. Backed up with industry leading warranty and a European factory, we provide solutions for excavators and backhoes of various makes and models including Kubota, Bobcat, Cat, JCB, Case, Komatsu, Kobelco, Takeuchi and more. Features Compact high torque Digga manufactured gearbox Highly efficient design with less moving parts Fitted with Eaton/Digga geroler hydraulic motor No case drain required Full range of shafts available upon request Extreme duty shaft locking system Drive fits down the hole for greater digging depth Low maintenance with 5yr gear box and 3yr motor warrant

2020 Kms ltrs 0 Owners