JAMMER.IE
image

GHEDINI, Bush Cutters

Brand: Ghedini Product Code: Hydraulic Bush Cutter (Mulcher) DA 51-52 Availability: In Stock The hydraulic supply takes place through the excavator PTO. The bidirectional rotor and the lack of a roller allows the bush cutter to work in both directions. The built-in-unit carpentry, like a normal bucket, allows it more resistance to possible accidental hits. Antishock and anticavitation valves, set to 160 bar, in order to protect the motor from possible damages due to a sudden change in pressure. Bidirectional and aluminium motor. Drainage not needed : it works with only the in and out oil hoses. The rotor works at 3000 rpm for a better efficacy in the bush cutting. The knives are Y shaped, with one more knife in the middle, allowing it to cut branches up to 6/8 cm diameter. Possibility both of direct coupling, with dimensions given by customers, and quick hitch.

2020 0 Owners
image

GHEDINI, Bush Cutters

Brand: Ghedini Product Code: GPGhidiniBC5 Availability: In Stock The hydraulic bush cutters DK series are designed to be applied to operating excavators weighing between 7 and 25 tons. The built-in-unit carpentry of our DK Series bushcutter, like a normal bucket, grants more resistance to possible accidental hits. The bracket has pins bolted on, with possibility to regulate its position.. Anti-shock and anti-cavitation valves are set to 160 bar, in order to protect the motor from possible damages due to a sudden change of pressure. The motor is made in aluminium. Drainage is not needed : it works with only the in-and-out oil hoses.The rotor works at 3000 rpm for a better bush cutting. The knives are Y shaped, with one more knife in the middle, allowing it to cut branches up to 14 cm diameter. Exclusively built with SKF bearings, rings nuts and lock washers.

2020 0 Owners
image

GHEDINI, Bush Cutters

Ghedini Bush Cutters - DC Series Brand: Ghedini Product Code: GPGhediniBC14 Availability: In Stock

2020 0 Owners
image

GHEDINI, Bush Cutters

Brand: Ghedini Product Code: GPGhediniBC3 Availability: In Stock The hydraulic supply takes place through the excavator PTO. The bidirectional rotor and the lack of a roller allows the bush cutter to work in both directions. The built-in-unit carpentry of our DB Series bushcutter, like a normal bucket, grants more resistance to possible accidental hits. Anti-shock and anti-cavitation valves are set to 160 bar, in order to protect the motor from possible damages due to a sudden change of pressure. The motor is bidirectional and made in aluminium. Drainage is not needed : it works with only the in-and-out oil hoses. The rotor works at 3000 rpm for a better bush cutting. The knives are Y shaped, with one more knife in the middle, allowing it to cut branches up to 12 cm diameter. Exclusively built with SKF bearings, rings nuts and lock washers. It’s possible to get the product with options of direct coupling, dimensions given by customers, quick hitch and even a hammer rotor suited for working widths of 1300 mm.

2020 0 Owners
image

GHEDINI, Bush Cutters

Brand: Ghedini Product Code: GPGhediniBC3 Availability: In Stock The hydraulic supply takes place through the excavator PTO. The bidirectional rotor and the lack of a roller allows the bush cutter to work in both directions. The built-in-unit carpentry of our DB Series bushcutter, like a normal bucket, grants more resistance to possible accidental hits. Anti-shock and anti-cavitation valves are set to 160 bar, in order to protect the motor from possible damages due to a sudden change of pressure. The motor is bidirectional and made in aluminium. Drainage is not needed : it works with only the in-and-out oil hoses. The rotor works at 3000 rpm for a better bush cutting. The knives are Y shaped, with one more knife in the middle, allowing it to cut branches up to 12 cm diameter. Exclusively built with SKF bearings, rings nuts and lock washers. It’s possible to get the product with options of direct coupling, dimensions given by customers, quick hitch and even a hammer rotor suited for working widths of 1300 mm.

2020 0 Owners
image

GHEDINI, Bush Cutters

Our hydraulic Bush Cutters DA Series Standard are designed for mini-midi excavators of operating weight up to 5.5 tons. The built-in-unit carpentry of our DA Series (standard) bushcutter, like a normal bucket, grants more resistance to possible accidental hits. Anti-shock and anti-cavitation valves are set to 160 bar, in order to protect the motor from possible damages due to a sudden change of pressure. The motor is bidirectional and made in aluminium. Drainage is not needed : it works with only the in-and-out oil hoses. The rotor works at 3000 rpm for a better bush cutting. The knives are Y shaped, with one more knife in the middle, allowing it to cut branches up to 6/8 cm diameter. It’s possible to get the product with options of direct coupling, dimensions given by customers, quick hitch and even a hammer rotor suited for working widths of 840 or 1080 mm.

2020 0 Owners
image

GHEDINI, Bush Cutters

Brand: Ghedini Product Code: GPGhediniBC2 Availability: In Stock The hydraulic supply takes place through the excavator PTO. Workings widths available: 650 mm, 840 mm and 1080 mm. The built-in-unit carpentry of our DA Series (heavy) bushcutter, like a normal bucket, grants more resistance to possible accidental hits. Anti-shock and anti-cavitation valves are set to 160 bar, in order to protect the motor from possible damages due to a sudden change of pressure. The motor is bidirectional and made in aluminium. Drainage is not needed : it works with only the in-and-out oil hoses. The rotor works at 3000 rpm for a better bush cutting. The knives are Y shaped, with one more knife in the middle, allowing it to cut branches up to 6/8 cm diameter.Exclusively built with SKF bearings, rings nuts and lock washers. It’s possible to get the product with options of direct coupling, dimensions given by customers, quick hitch and even a hammer rotor suited for working widths of 840 or 1080 mm.

2020 0 Owners
image

Digga's, Earth Drills

Brand: Digga Product Code: GPDiggaME2T-5T Availability: In Stock Digga's PDX2 to PD6 range of Earth Drills, also called Auger Drives, are ideally suited for mini excavators with a flow between 30 and 115 lpm and weight from 2T to 5T. Completely manufactured and assembled by Digga, using only the highest-grade materials and strictest quality control. Digga's England facility supplies European countries such as Russia, Poland, Germany, Italy, France, Spain, United Kingdom, Norway, Sweden and Finland to name a few. The innovative design allows the gearbox to go down the hole to maximise drilling depth without extensions, eliminating downtime and minimises maintenance, optimising your returns. Digga planetary earth drills are fitted with Digga / Eaton bell motors specially designed for earth drilling in most ground conditions. Backed up with industry leading warranty and a European factory, we provide solutions for mini excavators of various makes and models including Kubota, Bobcat, Cat, JCB, Case, Komatsu, Kobelco, Takeuchi and more. Features Compact high torque Digga manufactured gearbox Highly efficient design with less moving parts Fitted with Eaton/Digga geroler hydraulic motor No case drain required Full range of shafts available upon request Extreme duty shaft locking system Drive fits down the hole for greater digging depth Low maintenance with 5yr gear box and 3yr motor warranty

2020 0 Owners
image

Digga's, Earth Drills

Digga's PDD to PDX3 range of Earth Drills, also called Auger Drives, are ideally suited for micro excavators and small skid steer loaders with a flow between 15 to 55 lpm and a weight of 750kg to 2T. Ideally used for drilling holes with augers for fencing, tree planting, house foundations, and more. Digga's England facility supplies European countries such as Russia, Poland, Germany, Italy, France, Spain, United Kingdom, Norway, Sweden and Finland to name a few. The innovative design allows the gearbox to go down the hole to maximise drilling depth without extensions, eliminating downtime and minimises maintenance, optimising your returns. Digga planetary earth drills are fitted with Digga / Eaton bell motors specially designed for earth drilling in most ground conditions. Backed up with industry leading warranty and a European factory, we provide solutions for micro excavators and small skid steer loaders of various makes and models including Kubota, Bobcat, Cat, JCB, Toyota, New Holland, Case, Komatsu, Kobelco, Takeuchi, Terex, ASV and more. Features Compact high torque Digga manufactured gearbox Highly efficient design with less moving parts Fitted with Eaton/Digga geroler hydraulic motor No case drain required Full range of shafts available upon request Extreme duty shaft locking system Drive fits down the hole for greater digging depth Low maintenance with 5yr gear box and 3yr motor warranty

2020 0 Owners
image

Digga's, Backhoe

Brand: Digga Product Code: GPDiggaE20T-50T Availability: In Stock Digga's PD25 to PD50 range of Earth Drills, also called Auger Drives, are ideally suited for excavators with a flow between 120 to 230 lpm and a weight between 20 and 50T. Digga's drilling drives are world reknowned and available via our dealer network throughout Europe. Fitted with Digga / Eaton bell motors with intergrated pressure relief valve and input housing. The innovative design allows the gearbox to go down the hole to maximise drilling depth without extentions, eliminating downtime and minimising maintenance, optimising your returns. Digga planetary earth drills are specially designed for earth drilling and augering in most ground conditions. Backed up with industry leading warranty and a European factory, we provide solutions for excavators and backhoes of various makes and models including Kubota, Bobcat, Cat, JCB, Case, Komatsu, Kobelco, Takeuchi and more. Features Compact high torque Digga manufactured gearbox Highly efficient design with less moving parts Fitted with Eaton/Digga geroler hydraulic motor No case drain required Full range of shafts available upon request Extreme duty shaft locking system Drive fits down the hole for greater digging depth Low maintenance with 5yr gear box and 3yr motor warranty

2020 0 Owners
image

Digga's, Backhoe

Brand: Digga Product Code: GPDiggaE10T-20T Availability: In Stock Digga's PD12 to PD25 range of Earth Drills, also called Auger Drives, are ideally suited for 10 to 20t excavators with a flow between 70 to 230 lpm. Our Earth Drills are distributed all around Europe including Russia, Poland, Germany, Italy, France, Spain, United Kingdom, Norway, Sweden and Finland to name a few. The innovative design allows the gearbox to go down the hole to maximise drilling depth without extentions, eliminating downtime and minimises maintenance, optimising your returns. Digga planetary earth drills are fitted with Digga / Eaton bell motors specially designed for earth drilling in most ground conditions. Backed up with industry leading warranty and a European factory, we provide solutions for excavators and backhoes of various makes and models including Kubota, Bobcat, Cat, JCB, Case, Komatsu, Kobelco, Takeuchi and more. Features Compact high torque Digga manufactured gearbox Highly efficient design with less moving parts Fitted with Eaton/Digga geroler hydraulic motor No case drain required Full range of shafts available upon request Extreme duty shaft locking system Drive fits down the hole for greater digging depth Low maintenance with 5yr gear box and 3yr motor warranty

2020 0 Owners
image

Digga's, Backhoe

Digga's PD4 to PD10 range of Earth Drills, also called Auger Drives, are ideally suited for Backhoes and Excavators with a flow between 55 to 115 lpm and a weight from 5T to 10T. Ideally used for drilling holes with augers for fencing, tree planting, house foundations, and more. Digga's England facility supplies European countries such as Russia, Poland, Germany, Italy, France, Spain, United Kingdom, Norway, Sweden and Finland to name a few. The innovative design allows the gearbox to go down the hole to maximise drilling depth without extensions, eliminating downtime and minimises maintenance, optimising your returns. Digga planetary earth drills are fitted with Digga / Eaton bell motors specially designed for earth drilling in most ground conditions. Backed up with industry leading warranty and a European factory, we provide solutions for excavators and backhoes of various makes and models including Kubota, Bobcat, Cat, JCB, Case, Komatsu, Kobelco, Takeuchi and more. Features Compact high torque Digga manufactured gearbox Highly efficient design with less moving parts Fitted with Eaton/Digga geroler hydraulic motor No case drain required Full range of shafts available upon request Extreme duty shaft locking system Drive fits down the hole for greater digging depth Low maintenance with 5yr gear box and 3yr motor warrant

2020 0 Owners
image

GHEDINI, Vibrating Plate

Brand: Ghedini Product Code: GPGhediniVP1 Availability: In Stock The new vibratory plate compactors IC, ID and IE series are planned to compact the ground or the material which has been filled up in the trench. The combined action between the pressure exerted on the ground by the excavator arm and the high frequency vibration produced by the vibrator allows it to get the best compaction of the material used to fill the trench. The hydraulic supply of IC, ID and IE series takes place through the excavator PT0. It is also possible to use only the vibrator for applications on the riddling buckets and while the concrete is flowing. The vibrator , placed in the middle of the riddling bucket and fed by the excavator PT0, allows it a better result during the material selection and a better distribution of the concrete itself and consequently possible empty areas within the concrete are eliminated. Features std Vibratory Plates Compactors The motor is bidirectional and in aluminium. Drainage not needed : it works with only the in and out oil hoses. Antishock and anticavitation valves, set to 160 bar , in order to protect the motor from possible damages due to a sudden change in pressure. Exclusively built with SKF bearings, rings nuts and lock washers

2020 0 Owners
image

KATOLMER, Skid Steer Loader

A comfortable driver’s seat with anti-fatigue systems for the operator with all of the operations controlled from a single hydraulic joystick. IC55 with new Kubota V3800-Tier 4 motor observes regulations on emissions. Ample access to the engine and the centralised position of all the parts on the right side of the machine offer easy maintenance. Engine Kubota V3800-Tier 4 (78.3 kW / 2400 rpm) Weight (canopy / cabin) 6440 / 6620 kg Operating weight (canopy / cabin) 5000 / 5000 kg Travel speed (low speed) 0 / 10 km / h Travel speed (high speed) 0 / 12 km / h HST setting pressure 40.0 MPa (408 kgf / cm2 ) Vessel internal dimensions 2600 x 1950 x 350 mm

2020 Diesel Green 1 Doors 0 Owners
image

KATOLMER, Track Dumper

Power to accomplish hard work. Exceptionally easy to use, with an extremely sturdy structure and easy to maintain. Engine Kubota V2403-M-DI (34.8 kW / 2700 rpm) Weight 2280 kg Payload capacity 3000 kg Travel speed (low speed) 0 / 6.0 km / h Travel speed (high speed) 0 / 10.5 km / h HST setting pressure 30.9 MPa (315 kgf / cm2 ) Vessel internal dimensions 1700 x 1400 x 420 mm

2020 Diesel Green 1 Doors 0 Owners
image

KATOLMER, Skid Steer Loader

The A20 is small and ideal to work in confined spaces where other machines cannot. The compact size and weight facilitate transport.The width of 1220 mm facilitates manoeuvres in narrow passages, corridors, small paths and gates, whereas the nominal operating capacity of 435 kg enables movements in full compliance as a result of an oversized pump ensuring performance from higher category machines

2020 Diesel Green 0 Owners
image

KATOLMER, Skid Steer

Reliability, speed, servo-assisted joysticks and compactness are the strengths of the new KATO IMER skid-steer loader AS12, ideal to operate in confined spaces with the greatest flexibility and at the same time ensuring high performance. It is equipped with the Yanmar 3TNV76 1116 cc engine that achieves excellent performance even in the most complex and of difficult situations. Engine Yanmar 3TNV76 N° cylinders / displacement 3 / 1116 cc direct injection Rated output 15.6 kW / 2500 rpm Operating weight 1368 kg Weight on delivery with bucket 1288 kg Operating load 360 kg Tipover load 720 kg Breakout force 7.35 kN Standard bucket width 1130 mm Bucket capacity 0.18 m

2020 Diesel 1.2 ltrs Green 1 Doors 0 Owners
image

BRAIN SCOTT ENGINEERING, Rock Hammer Cradle

Brand: Brian Scott Engineering Product Code: RHC-001 Availability: In Stock

2020 0 Owners
image

ARROWHEAD, Rock Drill

Brand: Arrowhead Rockdrill Product Code: R90 Availability: In Stock

2020 0 Owners
image

ARROWHEAD, Rock Drill

Brand: Arrowhead Rockdrill Product Code: R80 Availability: In Stock

2020 0 Owners